Xoutpost.com - Winter maintenance project 4.6is

Page 8 of 17

Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)

- - Winter maintenance project 4.6is (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/104688-winter-maintenance-project-4-6is.html)

jontezan

10-13-2016 11:43 AM

Quote:

Originally Posted by X53Jay4.8is (Post 1090285)

I should have clarified I meant the internals of your engine look really clean. You can tell that your engine has received proper oil changes and use of quality oil by the cleanliness of the engine internals.

Hehe ok! Somethimes i get little confused with the english, i google a lot of carpart names to see what they are called in english 😄

Skickat från min iPhone med Tapatalk

jontezan

10-13-2016 11:49 AM

Quote:

Originally Posted by Awntchi (Post 1090288)

Jontezan: where do but all the parts and tools from? Is there any specialist in Sweden I don't know about? :)

Sent from my SM-G900F using Tapatalk

I ordered the tools from ebay. I have ordered a lot of parts from germany because it is much cheaper. The parts that has not been aviable from the german site, i have ordered from a site called schmiedmann. I would say that schmiedmann besides dealer is the place to buy oem bmw parts from 😄

Skickat från min iPhone med Tapatalk

jontezan

10-14-2016 06:29 AM

The valve covers are ready for blasting. My dad has a pretty big blaster cabinett, but he uses re-useable small steel marbles. Would that be ok to use on the covers. Or should i use glass or something else? =)

jontezan

10-14-2016 11:49 AM

I picked up the rest of the parts ordered, so now i have all the guides, chains, gaskets, ccv parts, waterpump+thermostat, and new steeringpump at home 👍😄 this became a pretty expensive winter maintenance project 😜

Skickat från min iPhone med Tapatalk

Awntchi

10-14-2016 02:09 PM

Quote:

Originally Posted by jontezan (Post 1090297)

Ok, I almost got happy :/ Thanks for the schmiedmann reference though, didn't know about that one. Lycka till med projektet ;)

Sent from my SM-G900F using Tapatalk

jontezan

10-14-2016 02:49 PM

Quote:

Originally Posted by Awntchi (Post 1090415)

Ok, I almost got happy :/ Thanks for the schmiedmann reference though, didn't know about that one. Lycka till med projektet ;)

Sent from my SM-G900F using Tapatalk

Thank you :-) schmiedmann have one thing what i think is really good, it is that you can browse realoem.com and take the original number for the sparepart you want, and just copy that to schmiedmanns search field and just add to shopping cart. 👍

Skickat från min iPhone med Tapatalk

X53Jay4.8is

10-14-2016 05:48 PM

Quote:

Originally Posted by jontezan (Post 1090419)

Schmiedmann is an excellent source of BMW parts

jontezan

10-15-2016 12:44 PM

Changed the steering pump today, found it pretty cheap. Funny thing is that it is the same manufactor that the original one zf lenkesystem but no roundel 😄👍http://uploads.tapatalk-cdn.com/2016...b5d550a5c3.jpg

Skickat från min iPhone med Tapatalk

jontezan

10-16-2016 05:09 AM

Didnt bother about the sterring fluid comming out of the hoses when changed yesterday. Today i poured the oil in a clear bottle and the oil is pitch black. Pentosin chf11s is supposted to be light green 😄 whats the best way to get as much old oil out of the system? I was thinking of dissconect pressure hose from pump again, rise front end and the fully turn steeringwheel left/righthttp://uploads.tapatalk-cdn.com/2016...362f6b237b.jpg

Skickat från min iPhone med Tapatalk

jontezan

10-17-2016 04:11 AM

Did a separate thread about the guide tube for the dipstick. How do you get it out of the ac bracket hole? 😄

Skickat från min iPhone med Tapatalk

All times are GMT -4. The time now is 12:50 PM.

Page 8 of 17

Show 200 post(s) from this thread on one page