All in - pulling the 4.6 engine and trans to fix oil leaks once and for all

[stunt]

Originally Posted by jsoto

Do you have any floornoise, or any noise at all ?

I do. The only thing about the AR3 i don't really like is that the pre-amp outs are only 2V. I wish they were more so that I could reduce the gain on the amps some.

Right now my AR3 ground is only through the OEM harness connector. I'm going to do a dedicated ground to the frame to see if that helps. Depending on the outcome of that, I'll probably get some in-line amps to boost the level at the HU before transmitting to the amps. Might also try some shielding where the audio cables cross the 12V cable from the battery.

But before all that, I need to get the drive train back in the truck! lol