Got my BMWhat app

[josiahg52]

Originally Posted by Couper93

How do you turn off the fogs when turning?

You mean, "Cornering Lights? "

[Couper93]

Originally Posted by josiahg52

You mean, "Cornering Lights? "

Yep, got it. Mine was labeled fog lights with turn signals.

I cannot get into the CMS to rid the seatbelt warning and navigation warning. Says I do not have a good enough connection. Any tips?

[Aceboogie204]

Originally Posted by Couper93

Yep, got it. Mine was labeled fog lights with turn signals.

I cannot get into the CMS to rid the seatbelt warning and navigation warning. Says I do not have a good enough connection. Any tips?

could be the dongle your using? just received the BMWhat dongle and it works great.

[Couper93]

Originally Posted by Couper93

Yep, got it. Mine was labeled fog lights with turn signals.

I cannot get into the CMS to rid the seatbelt warning and navigation warning. Says I do not have a good enough connection. Any tips?

I have the BMWhat dongle but cannot find the cornering light or the navigation warning.
I have a 2008 4.8.

[josiahg52]

Originally Posted by Couper93

I have the BMWhat dongle but cannot find the cornering light or the navigation warning.
I have a 2008 4.8.

What is the navigation warning? The 'Accept' screen? That cannot be coded off at this point in development by the BMWhat application.

As for the cornering light feature, it's there. Not sure what more to tell you then what's I the post that you quoted above. Can't be sure the 2008 is the same as my 2011, though.

[josiahg52]

In the FRM list there is "Cornering Lights with Front Fog Lights" which will affect the cornering light function. Note that coding the FRM will reset your OB, trip information and seat memory.

I have not tried the folding mirror option. Perhaps I will to see if I can get it to work. The start engine without brake seems to be elusive for all.

[josiahg52]

Originally Posted by Couper93

Yep, got it. Mine was labeled fog lights with turn signals.

I cannot get into the CMS to rid the seatbelt warning and navigation warning. Says I do not have a good enough connection. Any tips?

What OBD2 adapter are you using? Also, are you trying to connect with the ignition on? Key in and then press the Start button without depressing the brake pedal.

[mart_dev]

This is perhaps off topic but I always leave my X running while fiddling with the diagnostics since the battery really can't offer enough current for long enough to successfully complete most desired tasks. In 8 months I've had zero issues using this method. Perhaps the problem you're having with certain modules is linked to battery charge? If not, you might also consider switching from NORMAL to ENHANCED in the settings (comms section) and also slowing the rate of transfer (there is also an available option for this) which according to the programmers has been know to improve communication in some instances.

[Gerryballz]

Can you register a new battery with the iOS version?

[josiahg52]

Originally Posted by mart_dev

This is perhaps off topic but I always leave my X running while fiddling with the diagnostics since the battery really can't offer enough current for long enough to successfully complete most desired tasks. In 8 months I've had zero issues using this method. Perhaps the problem you're having with certain modules is linked to battery charge? If not, you might also consider switching from NORMAL to ENHANCED in the settings (comms section) and also slowing the rate of transfer (there is also an available option for this) which according to the programmers has been know to improve communication in some instances.

You may have something there. Although I have not had my engine running, I do remember that there was one module that I could not connect to in the configuration that I was in. I tend to think that I did not have the ignition on which is why I wanted to check. They cold also try to do it as you suggest with the engine running. I'm sure there is a voltage cutoff at some point.