|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
02-26-2012, 12:32 AM
|
|||
|
|||
|
After waisting a lot of time with TCUs, I have found it is best to stick with the ULF modules. Best Sellers BMW Bluetooth Kits All EURO models 1995-upto 03/02 mfg. date has the BITII to ULF conversion using the ULF module
The TCU works in this setup as well, but I have found the ULF modules far better and less troublesome than the TCUs. 
|
|
#2
04-01-2012, 06:13 PM
|
|||
|
|||
|
OK Here is my update, its still not working but I am yet to make my adaptor for Navcoder as Navcoder is not working with my ODBII cable.
But: I can successfully see the TCU in ,INPA, NCSExpert and SSS Progman V32. I can code the TCU Module in SSS and NCS Expert. I can change settings in INPA. The current status is: Bluetooth is active If I press the R/T button I get a message "Please Wait" There is a red flashing light on the MID. I opened up the TCU after getting frustrated and found at UK sim Card in it. I removed this but with no change. I then removed the "Sony Ericsson" GSM Module from the TCU and now the Red Light is Solid On, however I still get the Please wait message. After reading the error codes it would give an occasional a message about the GSM Antenna not being connected. I am about to get an adaptor cable to connect from the TCU to the GSM in case this is causing the TCU to time out. Any Suggestions?
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
