Yes, I'm with you Nika!
I need it too

Also looking for this version?

Thnx in advance

Grts

Looking too for this version

Well guys, then there are already 4 of us!
I know the knowledge we need is on this forum, but everyone who has said he has done it on this forum doesn't react on my PM's or e-mails .

It's pretty frustrating the de2it is downloadable here, but the de2nl isn't

Hi all,

After some investigation I think I have done it. I will test the new navboot file, but I would like to share with you first what I have done!

1. Downloaded CRC24.exe from the HackTheIbus Yahoo group (first subscribe, etc.):
http://autos.groups.yahoo.com/group/...iles/Software/

2. Downloaded NavTweak from the following thread:
http://www.xoutpost.com/navigation-sy...-navtweak.html

3. Extracted NAVBOOT (\V_2\RR\0101\BMWC01S\app_sw\) from the v27.1 image using UltraISO

4. Extracted the Lng_Hollands module from NAVBOOT using NavTweak

5. Opened the Lng_Hollands module with UltraEdit (www.ultraedit.com) and change "Lng_Hollands" to "Lng_Deutsch." with "." being "00" in HEX

6. Saved the Lng_Hollands file, calculated CRC using CRC24.exe and replace the CRC24 HEX values at the end of the Lng_Hollands file with the values from CRC24 - note that CRC24 then says "OK" when you check the file again

7. Replaced the Lng_Deutsch module with the NEW Lng_Hollands module using NavTweak - this now worked (before changing CRC it did NOT work)

8. Replaced the original logo with the BMW logo using NavTweak

9. Saved the new NAVBOOT file

Now I am going to replace the NAVBOOT file in the v27.1 image using UltraISO, I will rename the language files (in V_2/Voices/0502, V_2/language/0103 and V_2/language/0105), and I will try the new v27.1 de2nl image...more news soon!

Regards,

Nika.

Wow Nika, you've been busy!

Please make it downloadable once you've tested it!
Or if you send it to me I'll make it downloadable for everyone.

I'm hoping it works!!!

ps. If it works, could I put my own custom logo in the software just the way as you normally do that?

In Dutch we would say "het werkt als een trein!!".

The above mentioned procedure works perfectly - possibly someone can make this sticky? I will post it again with some additions in my next post. If someone needs to de2nl NAVBOOT file, please pm me...

Regards,

Nika.

Hi all,

Here's the entire procedure for changing your spoken language, written language and logo's, including references to where you can get the correct files, and step-by-step procedures for each step.

1. Download the new image (eg. v27.1). More info in the "BMW Navigation System FAQ" thread: http://www.xoutpost.com/articles/all-...ystem-faq.html

2. Download CRC24.exe from the HackTheIBUS group (first subscribe, etc.):http://autos.groups.yahoo.com/group/...iles/Software/

3. Downloaded NavTweak from the following thread: http://www.xoutpost.com/156049-post1.html

4. Extract NAVBOOT (\V_2\RR\0101\BMWC01S\app_sw\) from the image using UltraISO. More info in the "Editing Splash Screen" thread: http://www.xoutpost.com/102790-post161.html

5. Extract the language module you'd like to use (for instance Lng_Hollands) from NAVBOOT using NavTweak

6. Open the language module with your favorite hex-editor (for instance UltraEdit – http://www.ultraedit.com) and change the language name (for instance "Lng_Hollands") into the language you would like to replace in your navigation system making sure the length of the name is the same (for instance "Lng_Deutsch." with "." being "00" in HEX to keep the correct length)

7. Save the language file and calculate the CRC using CRC24.exe. Then replace the CRC24 HEX values at the end of the language file with the values from CRC24 – please note that CRC24 then says "OK" when you check the file again

8. Replace the old language module (Lng_Deutsch) in the NAVBOOT file with the NEW language module (Lng_Hollands) using NavTweak - this now worked (before changing CRC in step 7 it did NOT work, due to a CRC error)

9. Replace the original logo with a custom logo using NavTweak (GifExtractor works too, but you lose some of the traffic symbols with larger logo's). Save the new NAVBOOT file

10. Replace the new NAVBOOT file in the v27.1 image, and modify the languages (these are the spoken languages). See the following thread: http://www.xoutpost.com/102581-post5.html

11. Save the image in your favorite format (I use ISO) and burn it with your favorite burning software (I use Nero) on the lowest speed, see the following thread: http://www.xoutpost.com/navigation-sy...-released.html

Hope this helps all of you as a good guideline to modify the image! Possibly this post can be made sticky as it summarizes a lot of links needed to make all modifications currently possible (right?!).

Regards,

Nika.

Here's the de2nl file (first time using megaupload, hopefully it works):
http://www.megaupload.com/?d=FO2TB2VU

Regards,

Nika.