Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X ///M Forum (https://xoutpost.com/bmw-sav-forums/x-m-forum/)
-   -   Retrofit LED headlights? (https://xoutpost.com/bmw-sav-forums/x-m-forum/89790-retrofit-led-headlights.html)

X5X 09-09-2013 03:59 PM

Looks amazing! They are worth the money IMO. They completely transform to look of the X5's front end.

miguex 09-12-2013 12:24 AM

That is pretty cool! I want this on my car!

barata_84 09-12-2013 12:01 PM

Hi guys,
sorry to jumped in the conversation. Am driving E70 X5 2010. just got my headlight retrofitted to LCI-AHL. However, had some problems encountered:
1. Turning on lights, corona rings will flicker.
2. Whenever I step on the gas, corona rings will flicker too. This only happen when the car is moving though.
3. AHL only working when its switched to auto mode. Its normal?
4. My car is RHD but bought the headlight for LHD. Any way to change the angle? cus right now driver side is higher than the passenger side.

Everything works great when the car stay still. mayb i could have the instruction as well? [email protected] many thanks in advance guys!

Albert

330i ZHP 09-15-2013 01:38 AM

I just installed the FRM (Footwell Module in X5, controls lighting and other things) - the LED headlights work. With low beams it is the four upper portions and with high beams it is upper and lower portions of all four bowls.

I didn’t start the car - and I didn’t code…but no complaints from the car so far (without starting and no coding).

YAYYAYAYAYYAYYAYAYAYAYYAYA!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!

I will code the VO/FA in the am (copying the VO *vehicle order* from the CAS to the FRM) and the truck will be 100% done

330i ZHP 09-15-2013 08:45 PM

everything coded and works perfectly

reflogmx 02-11-2014 09:11 PM

Can I get wiring hook up instructions please?

330i ZHP 02-11-2014 09:59 PM

I emailed them to you - let me know if you rcvd them

reflogmx 02-11-2014 10:48 PM

I did. Awesome! Thank You very much!

330i ZHP 02-11-2014 10:57 PM

NP - I had to order my harness from Europe - if you want to get the harness I can get you the email address of the vendor I used

reflogmx 02-12-2014 12:23 PM

i got a quick question for you. on the wiring diagram i understand everything exept routing a9-a10 to pin 49 of x14261 plug. do i add these 2 wires to the one that is there or do i cut it and connect them to the module only?other than that it looks pretty simple. btw i removed fenders to have an easy access. thanx a ton


All times are GMT -4. The time now is 04:57 PM.

vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.