Yes, new frm 3.

Then contact Ram at [email protected]. He has done quite a few successfully. The process is relatively simple once all the software is installed. But you REALLY have to know what you are doing. He will also code anything else you want at same time.

For anyone doing this take note: In the U.S. your BMW dealer will not be able to code your vehicle for retrofitted LED headlights. You will need to use a 3rd party to do the coding, such as Ram ([email protected]).

Having a major issue... The halo rings only work one side at a time. One side works then then that same side will go out, then the opposite side will illuminate while the other goes out. Have put 3 FRM's in. Vehicle has been coded by Ram.... HELP!!!!!!!!!!

I am not home this weekend and I cannot look at my notes - I will see if I can get you any help

If I recall - aren't the grey wires that route to the FRM the ones for the LED rings?

If so, do you have them tied to the same circuit?

Or were those two wires for the side markers?

If they are side markers - then is it the two wires that go to the right passenger side wall...

I do not have the PDF in front of me - I am thinking this is a wiring issue (hopefully something that simple)

330 ZHP, any chance you may be able to speak to my repair shop + my tech that works at mclaren( and BMW prior to mclaren). They will be available in the morning. Please get back to me as we are running out of ideas and going back to stock headlights may be our only viable option.

Chris Hade
917 seven six three six two 6 0

Can someone email me the pdf instruction
[email protected]

Here are the retrofit instructions

thank you