Installed DMH electric oval cutouts.

^NICE!

I had a similar set up on my 350Z, made a big difference.

The summer tires the X came were shot. PO had left suspension to die. I picked up a used set off kijiji for $320 a while back. Before I put new tires on, I want to make sure all is good with suspension and alignment. At the tire shop this morning and discovered that non-RFTs were coming off and the used ones were the RFTs. They are the Bridgestone Duellers. On the plus side, they have a meatier sidewall, so they look the part. On the negative side, this is my wife's daily driver and there is no TPMS on this X. Guess I'll be checking pressures a lot. I do recall seeing valve caps that colour based on tire pressure so you can visually see if pressure has dropped. I just can't bring myself to do that to the X though.

New winter rubber goes on the winter rims this season and new summer rubber will go on next year. Non-RFT though. :)

I have the M&S all season version of those tires on my 'winter' wheels. When I replace the Michi's on the 19's, I'm going to go with the Dueler HP Sports again, just not the A/S ones. Great tires and Costco carries them so I get lifetime free balancing and tire rotation.

Awesome, I think you'll enjoy them. They run a little wide in thier size too which is another plus. :)

This evening I replaced the brake booster vacuum pump seals with the kit from BMP design. I tried sealing the cover with some permatex a couple weeks ago. It didn't work. Hopefully I've got it now! It seems good!

I also replaced all the T20 torx bolts since one was stripped to hell and I had to drill the head off....

I used some allen-head M6 10.9 bolts/screws from my local Ace hardware store.

Hey guys I installed.ed interior conversion kit, dis assembled the new aftermarket headlamps for morimoto retro rebuilding and Xbaled lighting.

Going to order heated seats pads soon and retro fit but I'm wondering maby if I have stock wiring ore layer?? Then I'll just go OEm?

What type of morimoto retrofit are you doing???

And what type of housings and projectors are you working on?

Looks great Brian.

Details make all the difference on an install like this. It looks like they came OE.