My 2005 X5 Aftermarket Radio Install Thread

[jabata]

yes, it's something strange, I hope to solve it with photos and the help of the experts

[jabata]

How big this forum, solving problems to Spaniards from all over the world. Very special forum.

[Crowz]

Hi Crowz,

Could you PLEASE provide pics of the wiring work on your link BMW IBUS Adapter – Android | Crowz Nest

That would be great! Thanks.

I will have to see what else I have picture wise of the wiring. I will add
whatever I can find for that.

[Crowz]

Originally Posted by bcredliner

The wires I want to put back in the correct slots are in the blue connector that goes into the back of the original radio. Is there something that lists the wire colors and slots they should be in?

The app is unlocked with DSP. There is no coding option for DSP, just the screen that I could pull up on original unit. Sound still comes on for 10-20 seconds and then goes off.

I certainly this is a communication problem rather that the only way to get their unit to work with DSP is to wire in the old tuner. Since it will be in the back I can probably hide it somewhere but what a cobbled up mess that will be.

I posted a picture of the plug and what I had wire color wise a few pages back let me try to find them.

[Crowz]

Originally Posted by Crowz

Ok these two pics may help on putting the wires back if you decide to go that route.

The one with the wire colors mentioned is for a different plug but list the colors and of the wires and what they do.

The one with the blue connector is what you have showing the pin numbers.

This is all I had wiring color wise.

[jabata]

Good evening from Spain, Sevilla, until tomorrow.

[Crowz]

Originally Posted by jabata

Good evening from Spain, Sevilla, until tomorrow.

On your unit the radio antenna wire plugs in on two ends. One end plugs into the radio in the dash and the other end of that cable has to be run to the rear hatch area and plugged in close to the amp where the spare tire is. If both are not hooked up it wont pick anything up radio wise.

[Crowz]

Originally Posted by Crowz

I will have to see what else I have picture wise of the wiring. I will add
whatever I can find for that.

I added some more pictures but I am not sure if that is what you wanted.

[jabata]

good days, I have found the problema.el cable antenna seicane that connects in the back next to the amplifier is male and not fit into place.

[jabata]

[/IMG]This connection is male and the antenna terminal of the sSeicane is also male. This should be the problem.