v31 and 32 contain the same navi soft (except NAVI03) so you can use any of them

Adam, you can't bounce between v31 and v32 as the are the same, you will need to bounce between v30 and either v31 or v32.

__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode.

I can't seem to get this working. I have red this thread and the V29 V31 thread completely.

My car is imported from Germany to the Netherlands E46 330d.
My current Navi version is SW4 1/20

I have tried two different downloads V30 and V32, using two different recorders and two different brands of CD-R recordables. Used Nera and ImageBurn. Checked the Cd's, there were no errors.

Nothing works.

No matter what I try my Navi just keeps telling me No CD/DVD in navigation computer.

Any suggestions ??

O, and what is the use of waiting for the red light on the nav unit to go out. Seems like when this light finally goed out and you press the eject buton it start doing the exact same thing you just have been waiting 3 mnutes for.

Contact Edwin and get his help. He is in NL too and hangs out on the e38 board of bimmerboard.com. I think he will know what to do.

I just bought a 330 CiA -00. It has Navigator Mk3 SW 3-1/20. I believe I can update it to 3-1/63. Can I use this v32 ? How do I know if the Navigator in my car is "split screen" or not ? There was a message saying that if you try to update with v32 you would damage mk3 without "split screen".

Hi

Where can i download
Navigation system operating software V17.1 for MK III systems without the "split screen"?


rgds

Lippo

Hi Guys... I too am new to the site and a proud new owner of a 03 X5..

Been reading the website most of the morning to learn about upgrading to V32 and found lots of great information.

I have a question about the Imgburn application mentioned in this thread and many others on this topic. I downloaded the V32 ISO from the first page of this thread and opened it with Imgburn. However, when the ISO is opened in Imgburn (before I write it to a CD) it does not list the Mode anywhere. A found a post on here telling me to look at the Sectors line, but mine just lists -- Sectors: 128,399. It does not list Mode 1 or Mode 2 anywhere on the right hand side of the Imgburn screen.

I wrote the ISO image to disc, but still did not see any mention in the summary that it was burned as a Mode 2. Can anyone help with this basic information?

I opened the ISO that was downloaded from the first page of this thread in Nero and it says the that Track 1 is Data (mode 1). So, do I need to get a link to another ISO that is in mode 2? If so, where can I find that? If not, what do I need to change in Imgburn to burn it as mode 2 if that's possible?

My Imgburn is version 2.4.2.0
My Nero is 6.0.0.0

I have a MK4 DVD based NAV and would like to verify if the image has been written in Mode 2 before attempting an update.

Thanks everyone!

Shawn

UPDATE: MK4 system was successfully updated using mode 1. After reading this site some more, I found the MK4 didn't require mode 2.

I've read from a member on here that mode 1 or mode 2 doesn't matter on the upgrade when it's being performed with a MK4. Can anyone confirm this? Definitely want to make sure I do this correctly


UPDATE: MK4 system was successfully updated using mode 1. After reading this site some more, I found the MK4 didn't require mode 2.

I've downloaded the keycd image, but I can't seem to burn successfully. When I look in the downloaded folder, I see these three files: image.img, image.ccd, and image.sub. So I click on the .img file and imgburn launches. I set the burn speed to 1X, it goes through the burn process, and then spits out error message: Verify failed! Reason: Layouts do not match. The same occurs (obviously) if I launch imgburn first and point to the same file.


The v31 upgrade burned successfully. I see 55 files so that is good to go.

Please help as I want to update my navsat today.

thanks,
Joe