Good job Slick!
Did you guys see an option to have the low beams as DLR instead of high beams?

1. fogs on w/ hi beams
-FL_UND_NSW_NICHT_GLEICHZ - nicht_aktiv
A. Fog lights with Highbeam Flash
-LH_UND_NSW_NICHT_GLEICHZ - nicht_aktiv
2. hi beams on with low beams
3. disable corner/parking lamp, KMBI ->, LCM ->,
-BLK_V_GED_ALS_SIDEMARTK change Activ to Nicht_activ
4. disable seat belt chime
5. double flash hazards
6. window/roof close with remote GM3 - done.
KOMFORTSCHLIESSUNG_FB - activ
7. cold monitoring off. Angel Eyes and License Plate, KMBI ->, LCM->
-KALTUEBERWACHUNG_KZL - aktiv
lic plate cold monitoring - needs to be set to nicht_activ
-KALTUEBERWACHUNG_SL_LV - Angel Eyes
-KALTUEBERWACHUNG_SL_RV - Angel Eyes
8. I wish we could close the mirrors with lock.
-SPIEGELEINKLAPPEN - aktiv (not tested)
9. Sync time with GPS.
-GPS_UHR - aktiv
10. Nav disclaimer off
- LAENDERVARIANTE_GT setting: ece
11. 1 click unlock after shutting car off...all 4 doors unlock
12. euro hazards
13. door gong
14. key gong
-ZUENDSCHLUESSEL_WARNUNG
15. seatbelt gong
-GURTWARNUNG_GONG
16. real speed on speedo
17. wiper goes back down after engine shut off
18. Double Flash Hazards. KMBI ->, LCM ->,
- WARNBLINKER change einfachimpuls to doppelimpuls
19. Low beams as DRL. KMBI ->, LCM ->
-AL_ALS_DRL change Nicht_activ to activ
20. Dimmed High Beams as DRL
-FL_dimmung_Als_drl, I have a value of "wert_06", and I do not have DRLs on. So.....
21. LED Tail Light Option
-LED_RUECKLICHT_OPTION chnage to Activ, not tested.
--Might also need to disable the following.
---KALTUEBERWACHUNG_BL_L change to nicht_activ
---KALTUEBERWACHUNG_BL_R change to nicht_activ

Number 19 in my last post.

Also please note number in the code list above. The previous line that was given in this post is not correct. I changed this in post #102 to reflect the setting that does work.

I wouldn't use low beams as drls with Xeonns

Yea I agree. I don't know how that would function. I think it might fire up the Xenons right away. I haven't tested this, and I have no desire to have this feature. But someone should try it, and let us know what it does to the lights.

OK guys, updated list. If someone can help me locate the items that I can't find, that would be tits. Thanks again.

****LCM Coding Options****
1. fogs on w/ hi beams
-FL_UND_NSW_NICHT_GLEICHZ - nicht_aktiv
2. disable corner/parking lamp
-BLK_V_GED_ALS_PARKLICHT - nicht_activ
3. Double Flash Hazards.
- WARNBLINKER - change einfachimpuls to doppelimpuls
4. cold monitoring License Plate Lights off
-KALTUEBERWACHUNG_KZL - change aktiv to nicht_activ
5. cold monitoring Angel Eyes off
-KALTUEBERWACHUNG_SL_LV - Left, change activ to nicht_activ
-KALTUEBERWACHUNG_SL_RV - Right, mine was nicht_activ to begin with, so no change.
6. Low beams as DRL. KMBI ->, LCM ->
-AL_ALS_DRL - change Nicht_activ to activ
7. Dimmed High Beams as DRL
-FL_dimmung_Als_drl - I have a value of "wert_06", and I do not have DRLs on. So...
8. LED Tail Light Option - if someone brings me a set of LED tails, I can test this.
-LED_RUECKLICHT_OPTION - chnage to Activ, not tested.
--Might also need to disable the following Cold Monitoring off.
---KALTUEBERWACHUNG_BL_L - change to nicht_activ
---KALTUEBERWACHUNG_BL_R - change to nicht_activ
9. Seatbelt Warning Gong
-GURTWARNUNG_GONG - change to nicht_activ
10. Seat Belt Warning on Display
-Gurtwarnung_text - choose either activ or nicht_activ
11. Fasten Seat Belt
-GURT_ANLEGEN - default is melden (report), need to research other options.
10. Key Left In Ignition Warning When door is open
-ZUENDSCHLUESSEL_WARNUNG change to nicht_activ


****GM3 Coding Options****
1. window/roof close with remote GM3
KOMFORTSCHLIESSUNG_FB - change to activ


================================================== ========

Stuff that I cannot find yet.

A. Fog lights with Highbeam Flash - I cannot find this in LCM
-LH_UND_NSW_NICHT_GLEICHZ - nicht_aktiv

2. hi beams on with low beams

4. disable seat belt chime


8. I wish we could close the mirrors with lock.
-SPIEGELEINKLAPPEN - aktiv (not tested)

9. Sync time with GPS.
-GPS_UHR - aktiv

10. Nav disclaimer off
- LAENDERVARIANTE_GT setting: ece

11. 1 click unlock after shutting car off...all 4 doors unlock

13. door gong

16. real speed on speedo

17. wiper goes back down after engine shut off

Slick, i sent the file twice to the email you gave me, it bounced both times - did you actually get it?

Also, you are doing just one module at a time - I did ALL modules at once (maybe I should not have!!) and I did not look at which line of programming was where - I just updated the line, and then wrote it in... I could not get windows to continue to roll when doors open, i could not get them roll up with the keyfob... but the time sync with GPS worked fine...

Also, it seems that some options need to change simultaneously with other parameters to take effect - door autolock did not take root until i updated the individual keys' programming...

Yea you have to do one module at a time. Windows up is literally one parameter to activ. That's it. My NCS was giving me issues doing all the modules at once.

The door lock is actually 2 features in GM I think. Just these settings, and thats it. Not sure which module this is from.

-VERRIEGELUNGSSCHWELLE - EXAMPLE: 16_km/h
-VERRIEGELN_AUT_AB_X_KM/H - NOTE: This is nicht_activ on mine, but it locks at 10mph.

So I just finished trying everything above. My thoughts;
The gongs I returned back to stock. They can be removed with above codes, but I kind of like it factory reminders.

Double flash was nuts. Very fast double flash. Looks cool from outside, sounds nuts inside.

Cold monitoring fixed my strobe lights all around. I bet I can put the cheapest shit in my car now, and it will last. Cold monitoring has ruined one of my ice vxx lights. The driver side had CM active. Those rings look a faded color now. Gotta call iUmnotza and get warrantee on this.

Otherwise, I think I coded pretty much everything with the basics. I want to see if I can add the SA options from the E65 and try to get the mirrors to fold on lock.