Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E70) Forum (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/)
-   -   What have you done to your E70 today? (https://xoutpost.com/bmw-sav-forums/x5-e70-forum/92812-what-have-you-done-your-e70-today.html)

Nanniepoo 03-25-2018 04:49 PM

In the middle of an oil change and forgot what I did last time. Oil drain plug torque is 25Nm, correct? I know the oil filter housing is. This is for an N62

Sent from my LG-H872 using Tapatalk

Nanniepoo 03-26-2018 08:45 AM

Went with 25 Nm and all good.

I did have a massive brain fart and zoned out while filling with oil....put an extra quart in so had to drain and refill :/ lol

Entropy 03-26-2018 11:50 AM

Topped-off the oil thanks to BMW's unique valve stem seal design. Currently consuming about 1 quart per 2,500-3,000 miles.

Badjaox5 03-26-2018 03:19 PM

recently acquired 2009 X5D
-performed 120K fluid maintenance.
-Replaced Oil feed and return lines
-replaced worn out vacuum lines.


has anyone done the XHP Trans tune. Also looking into full deletes & tune in coming weeks

Crowz 03-27-2018 02:01 PM

Ordered Pirelli Scorpion Verde All Season Run Flat's for my X5 today.

Will be nice having the piece of mind knowing I wont be left stranded since the previous owner replaced two of the tires with regular tires and I don't have a spare because it came with run flats.

Toothbrush 03-28-2018 11:12 AM

Had some 'free' time since I'm stuck not making any progress on other work and finally got around to replacing the thrust/tension struts/radius rod/lower control arm (not sure what to actually call it :D ).

Either way, Indy told me the bushings were shot so I ordered the entire arm for left/right a while back and they've been staring at me ever since. Old ones didn't look as bad as they were, at least to my untrained eye, but a quick drive to make sure nothing would fall apart and what a difference fresh rubber/ball joint will make.

Previously, hitting larger bumps or even small potholes would jar the whole vehicle and make it seem like there was some unnatural flex in the chassis. Much smoother now.

And yes, I did torque them down with the suspension loaded.

MadJap 03-28-2018 06:26 PM

Replaced the valve cover (Cam cover) gaskets. Holy hell, that's a PITA job.

I also replaced the tension struts last week. Can't believe how much difference it made on the drivability/handling. Strongly recommended if you know they have not been replaced.

Crowz 03-29-2018 08:14 PM

Had order and installed today a new cigarette lighter. Mine came with the plastic dummy lighter in the socket when I bought it.

dennisvab 04-07-2018 11:04 AM

Replaced the headlight lens on the passengers side last night. I purchased the lens’ from China off of eBay. Had to dremel off the old lens.

https://photos.app.goo.gl/KVwCXyz8djchY24W2

dennisvab 04-07-2018 11:13 AM

https://uploads.tapatalk-cdn.com/201...ecfa4733b6.jpghttps://uploads.tapatalk-cdn.com/201...f5a5425074.jpghttps://uploads.tapatalk-cdn.com/201...d64d59e38e.jpghttps://uploads.tapatalk-cdn.com/201...bfebe55524.jpghttps://uploads.tapatalk-cdn.com/201...26ef66d0e3.jpg


Sent from my iPhone using Tapatalk


All times are GMT -4. The time now is 10:51 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.