![]() |
Quote:
|
Installed polish air deflectors and bought chinese ....https://uploads.tapatalk-cdn.com/201...5a84e4b500.jpghttps://uploads.tapatalk-cdn.com/201...5aa53cf592.jpg
Sent from my SM-G900F using Tapatalk |
3 Attachment(s)
Took off the winters, didn't know if i should put on OEM 20's or the 22's , went with the 22's this season. Running 295/30/22 fronts and 335/25/22 rears.
Put on the aftermarket trailer hitch as didn't want to cut into my bumper with the OEM one :thumbup: (need to now figure out a way to mount the plug nicely to to the hitch somehow as I just tie wrapped it to the side for now) All lights (front/rear/sides) taken out and painted slightly black. Side skirts/flares/bumpers all sanded and painted black. Rear reflectors painted black All emblems from blue now black Just need to clean it at this point, damn Canadian weather lately :confused: |
Put on brand new tyres and 20w heelshttps://uploads.tapatalk-cdn.com/201...c19a684202.jpg
Sent from my SM-G900F using Tapatalk |
Oil/Filter change yesterday. Castrol Edge 0W40, Mann-Hummel filter.
|
Replaced all injectors/coils/spark plugs last night. I swapped the engine less than a year ago and have been dealing with misfires and have already had an injection issue. So I decided to replace everything before my road trip to Florida from New York with the family. https://uploads.tapatalk-cdn.com/201...01b793b73e.jpg
Sent from my iPhone using Tapatalk |
|
Had the H&R 1.2 installed at indy and did the ride height adjustment with INSTA/D at home. But just noticed the front right is about 10 mm higher than the front left. Don't know whether this difference was there before the install or not. Is there a way to adjust this? It's not an issue when driving, but I guess it still kind of bug me since I know there is a difference. Rear heights are same though. THe car has adaptive drive and the whole EDC VDM thing. Would appreciate if somebody could help direct me to the right path forward.
|
2 Attachment(s)
Pulled the front seats to tackle some much needed cleaning in those dark crevices.
|
Tail light error
3 Attachment(s)
So I have been getting error message on my dash about my tail lights. Turned out the driver light bulbs for turn/hazard bulbs has melted and not sure what caused it. My solution? Got me some LCI LED tails. Love it! ;) At least I found reason to justify getting it to the wifey :thumbup:
|
| All times are GMT -4. The time now is 05:26 AM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.