Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   What did you do to / for your E53 today?? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/78921-what-did-you-do-your-e53-today.html)

bcredliner 05-03-2017 07:44 PM

1 Attachment(s)
Quote:

Originally Posted by crystalworks (Post 1108395)
After looking at the RealOEM diagrams... that looks like the ideal place to put them. Did you have them opening as dumps, or skipping around the resonator to meet the muffler piping down stream as I was thinking?

As dumps. I wouldn't go to cutouts if you are just going around the resonator. Not a value.

TiAgX5 05-03-2017 09:11 PM

Quote:

Originally Posted by bcredliner (Post 1108402)
As dumps. I wouldn't go to cutouts if you are just going around the resonator. Not a value.

And the sound bcredliners X makes?

Better then any car with OE exhaust manifolds should.

First time I heard it, I told Brian it sounds like this......
https://www.youtube.com/watch?v=Iz5JoGJaHMY

crystalworks 05-04-2017 02:09 AM

Quote:

Originally Posted by bcredliner (Post 1108402)
As dumps. I wouldn't go to cutouts if you are just going around the resonator. Not a value.

I'll try it that way first.

Your value is in performance, whereas mine is in audible tone so we are after different goals. I think I'd love to hear what the Dinan mufflers sound like without the resonator on there though.

Quote:

Originally Posted by TiAgX5 (Post 1108409)
And the sound bcredliners X makes?

Better then any car with OE exhaust manifolds should.

First time I heard it, I told Brian it sounds like this......
https://www.youtube.com/watch?v=Iz5JoGJaHMY

I think I've heard a clip of an X with cutouts. Perhaps that was bcredliner's? Have you posted a clip of your setup with the cutouts in that location?

bcredliner 05-04-2017 05:19 PM

Quote:

Originally Posted by crystalworks (Post 1108416)
I'll try it that way first.

Your value is in performance, whereas mine is in audible tone so we are after different goals. I think I'd love to hear what the Dinan mufflers sound like without the resonator on there though.



I think I've heard a clip of an X with cutouts. Perhaps that was bcredliner's? Have you posted a clip of your setup with the cutouts in that location?

Haven't posted either the sound of Dinan Exhaust or open cutouts.

crystalworks 05-04-2017 06:29 PM

Quote:

Originally Posted by bcredliner (Post 1108455)
Haven't posted either the sound of Dinan Exhaust or open cutouts.

Gotcha. I know I've seen a vid of someone's with cutouts...

Edit: This was it...

DTCUk4d7v0c

But this is pretty nice and with Dinan mufflers:

l4eCrJS2hNg

BTW Brian, took your advice and did the plasti dip on the front grilles. Only have one done so far, but with the glossifier, it looks 100% better than those cheesy 6 series style grilles. :thumbup: I'll post pics when complete.

X53Jay4.8is 05-04-2017 09:26 PM

Quote:

Originally Posted by crystalworks (Post 1108460)
Gotcha. I know I've seen a vid of someone's with cutouts...

Edit: This was it...

DTCUk4d7v0c

But this is pretty nice and with Dinan mufflers:

l4eCrJS2hNg

BTW Brian, took your advice and did the plasti dip on the front grilles. Only have one done so far, but with the glossifier, it looks 100% better than those cheesy 6 series style grilles. :thumbup: I'll post pics when complete.

As I imagined all you need with your setup x-pipe should do the trick for what you are looking for.

srmmmm 05-05-2017 05:16 PM

After 74,000 miles on the Yokohama YK580s, they were finally down to 5/32" so it was off to Discount Tire for another set. Trouble though, is they aren't made anymore and the replacement tire, the 740, doesn't come in the 235/65R17 size. Since these are probably the last set I'll buy for this vehicle, I settled for the YK-HTX. Have to run them 2psi higher to get the same steering response, but the ride is a touch softer.

2002 X5 3.0 321,700 miles
2014 428i 26,500 miles

2004 325i sold at 123,600 miles
2001 325i sold at 66,000 miles

1970 Firebird - under restoration

itscoo2pyopants 05-07-2017 02:24 AM

just finished the 20pcs suspension refresh kit from FCP. stock bushings with 137k miles didnt look so bad. rears were a PITA!!! i would be able to do it in half the amount of time now. had to take it apart multiple times to figure it out.

estorilx53 05-08-2017 08:17 AM

BC Coilover Installed E53 https://uploads.tapatalk-cdn.com/201...e666b5d42e.jpghttps://uploads.tapatalk-cdn.com/201...03437709d2.jpghttps://uploads.tapatalk-cdn.com/201...83c14158d1.jpghttps://uploads.tapatalk-cdn.com/201...3e318572b2.jpghttps://uploads.tapatalk-cdn.com/201...6ba1b7b79d.jpghttps://uploads.tapatalk-cdn.com/201...79a4d74efa.jpghttps://uploads.tapatalk-cdn.com/201...ef911e6348.jpg


Sent from my iPhone using Tapatalk

Overboost 05-08-2017 08:49 AM

Quote:

Originally Posted by estorilx53 (Post 1108625)
BC Coilover Installed E53
https://uploads.tapatalk-cdn.com/201...e666b5d42e.jpg
Sent from my iPhone using Tapatalk

Love the stance! Looks great. What was the complete cost for the upgrade? :thumbup:


All times are GMT -4. The time now is 03:11 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.