* DIY still in progress*
1) Main screen ---------> 2) Select: Diagnosis
3) Select: series & model -> 4) Confirmation vehicle & modules identified
5) Highlights all modules found -> 6) Select: Short Test
7) Answer Variants ------> 8) Short Test completed
9) Select: Function Selection -> 10) Select: Service Functions, Chassis, Dual-axle air suspension EHCII
11) Select: Ride-level adjustment -> 12) Select: Test Plan
13) Displays own test plan -> 14) Prepare vehicle
15) Start calibration: YES -> 16) Confirming Assembly Line Mode
17) Select: Ride height matching, front axle -> 18) Front wheel size: 20
19) Ignore (don't measure) -> 20) Enter Front, Right: 742
21) Enter Front, Left: 742 -> 22) Confirm L&R values and start calibration: YES
23) Front calibration complete, calibrate rear: YES -> 24) Rear wheel size: 20
25) Ignore (don't measure) -> 26) Enter Rear, Right: 744
27) Enter Rear, Left: 744 -> 28) Confirm L&R values and start calibration: YES
29) Rear calibration complete, calibrate front: NO -> 30) Assembly Line Mode deleted
31) Service Function ended -> 32) Select: End, Quit
33) Terminate Operating Mode: Terminate
Ride-Level adjustment complete!
After being lowered 35mm (normally the lowest setting):
If you want to see a before pic, click on the first pic in my sig.
06-09-2009, 06:28 PM
Threaded Mode
