|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Quote:
It uses a very special map format used only in Japan, and not in any other country in the world. The navigation computer cannot operate in any other country outside of Japan, as no map data exists You will need to replace the navigation computer with the correct computer for your country I do this all the time here in New Zealand Jochen |
|
#2
|
|||
|
|||
|
V29.1 has been released and is now available
Quote:
First of all how do I determine which Mk is it on since it has DVD Rom written on the unit. Then how do I replace the natvigation computer. Can I over-write the current system and replace it with current common OS i.e V22.1 or V29.1. Let me know if you can assist. Thanks. |
|
#3
|
|||
|
|||
|
Quote:
To change it you must remove (and throw away) the Japanese nav computer, and fit a European unit. For your age E39, I would recommend fitting a Mk4 nav computer. You will need to change wiring, and fit new connectos. It can be done, I've done it. Email me privately or PM me and send me photos of what you have , I can supply the very special connectors (new) and provide full instructions for what you have to do. Jochen |
|
#4
|
|||
|
|||
|
Hey guys one of my friends has the Mk III or Mk II computer how can we upgrade it to version 29.1? Just burn it on a regular cd? Thanks.
|
|
#5
|
|||
|
|||
|
Quote:
The MkII and MkIII and no longer in developmnet. The last OS version that was every produced for these units is: MkII = 2-1/81 MkIII = 3-1/63 If you have these versions, then no further upgrade is available. The v29 disc contains these versions, so you can burn and insert the v29 disc, the nav will tell you if the OS is up to date or not. When burning a disc, use ImgBurn, ensure the image is Mode2/Form1 format, and always verify the disc after the burn, to make sure it is error free. |
|
#6
|
||||
|
||||
|
Mk2's and Mk3 will not upgrade to v29, but you can use a v29 to upgrade to the latest for that nav drive.
Just burn to a regular blank CD, but make sure is a good quality one, burn at x1 speed only and make sure its Mode2/Form1. Use imgBurn to burn the CD and all will be well.
__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode. |
|
#7
|
|||
|
|||
|
Hi all. It seems that the update link has expired. Can anyone guide me to the correct location or re-upload the V29.1 update?
Many thanks |
|
#8
|
|||
|
|||
|
As noted, the link to the upgrade does not work. I would like to find a place where I can understand exactly how the DVDs etc. and the navigation system work; especially what the updates bring. Mine is a 2004 E64 with the Mark IV system. I read a lot of stuff but can't tell if the comments will apply to my system as a lot of them are older systems. The Navteq site wants to sell a update for $199, which seems to be a lot as I upgraded my Garmin for a lot less than that. I like what I have in the 325, but like some of the features of the Garmin a little better. I can use any help available.
CBS |
|
#9
|
|||
|
|||
|
No Dutch language in V29.1
Hello, i update mij mk4 system in cooper s with version 29.1, before i had version 26 ( with dutch).
Now with 29.1 version i don't have dutch in menu, only Eng, Germ. en Fr. Is it possible to get ducth in it ? thnx |
|
#10
|
||||
|
||||
|
Yes. You'll need to recode your navigation system with an I-BUS hardware kit and the geocoder application available somewhere in this forum. The piece of software can change the navigation system between euro and usa mode (not relevant), the language packs shown, amongst other nice stuff.
__________________
My BMW: Photos |
![]() |
| Bookmarks |
|
|
|
|